Installation and Test Policy

All i-Net installations are fully project managed and carried in line with our ISO 9000 quality standards. Cable installations and terminations are carried out in accordance with the cabling system manufactures specifications and guidelines. Cables are routed, installed and supported using “best practice” to ensure that optimum performance is achieved regardless of the installation environment.

i-Net operate a full (100%) test policy for all installations. Testing is carried out using fully calibrated (Fluke) test equipment and to the cable system manufacturers’ specification. Test results are verified on site by the lead engineer before being sent to the Project Manager for sign off and acceptance. Full test results are provided to customers where requested.

Installation and codes of practice

All installations are carried out in line to the Cabling System manufacturers’ guidelines and specifications. All installation works comply as applicable with the following general specifications:

BS EN ISO 9001: 2008 Quality Management System
TQAB/TQAS/3. Generic Cabling Systems Installation
BS 7718 Installation of Fibre Optic Cabling
BS6701 Telecommunications equipment & telecommunications cabling –
Specification for installation, operation & maintenance’.
BS EN 50173-1 Information technology - Generic cabling systems.
BS EN 50174 Information Technology – Cabling installation.
Part 1 – Specification and quality assurance
Part 2 – Installation planning and practices inside buildings
Part 3 - Installation planning and practices outside buildings
ANSI/TIA/EIA-568-B.2 Category 5,5e,6&6A Commercial Building telecommunications Cabling Standard (USA).
ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises.
BS7671 / 16th Edition IEE Wiring Regulations

Health & Safety

i-Net operate a stringent Health and Safety policy. All engineers are trained to our own Health and Safety standards. In addition engineers are all accredited to the CSCS standard for safe site working and competence.

Enviroment Aware Working

i-Net prides itself in the manner in which its engineers approach individual installations. Our Environment Aware Approach (EAP) ensures that we are able to operate under the most stringent site requirements. Whether the site is Hazardous and needs special Health and Safety attention or it is an occupied office where our customers staff need to remain undisturbed, our engineers always plan ahead, assess risk and apply a suitable working method.